Richiedi Scheda Tecnica 3D
Three Phase
Three phase motors for general use with standard output and standard dimensions, 2, 4 and 6 poles. Efficiency class from IE1 to IE3.
Single Phase
Single phase motors series EM with resin-filled run capacitor fitted to the frame. Series EMD is equipped with a starting and a run capacitor fitted inside the terminal box. The auxiliary capacitor, managed with either a centrifugal or an electronic circuit breaker, is able to reach starting torques of up to 1.5 times the rated torque, ensuring interchangeability with the three-phase models.
Two-speed Three Phase
Two-speed three phase motors for general use with a single winding or two separate windings. Range for shaft height up to 132 with standard output and standard dimensions. Sizes from IEC56 to IEC132
Three Phase
Three phase motors for general use with standard output and standard dimensions, 2, 4 and 6 poles. Efficiency class from IE1 to IE3.
Single Phase
Single phase motors series EM with resin-filled run capacitor fitted to the frame. Series EMD is equipped with a starting and a run capacitor fitted inside the terminal box. The auxiliary capacitor, managed with either a centrifugal or an electronic circuit breaker, is able to reach starting torques of up to 1.5 times the rated torque, ensuring interchangeability with the three-phase models.
Two-speed Three Phase
Two-speed three phase motors for general use with a single winding or two separate windings. Range for shaft height up to 132 with standard output and standard dimensions. Sizes from IEC56 to IEC132
IE1
Motor series ET, output is compliant with IE1 (Standard efficiency)
IE2
Motor series ETH, output is compliant with IE2 (Increased efficiency)
IE3
Motor series ETH, output is compliant with IE3 (Increased efficiency)
EM
Single phase motors series EM with resin-filled run capacitor fitted to the frame.
EMD
Single phase motors with high starting torque Series EMD compact, with run and starting capacitors built ino the terminal box.
EME
Motek single phase square type brake series with capacitors built into the terminal box
HPM
Seimec HPEM single phase square type range with capacitors built into the terminal box.
ETE
Motek ETE three phase square type series for high power output and reduced shaft height.
HPE
Seimec three phase square type range with high power and reduced radial dimensions.
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
High-Torque Brake DC
Serie Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
A hand release lever is available on request.
High-Torque Three-Phase
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
High-Torque Brake DC
Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
A hand release lever is available on request.
High-Torque Three-Phase
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
FRENO FP
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
FRENO FC
Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
A hand release lever is available on request.
FRENO FA
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
High-Torque Brake DC
Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
High-Torque Three-Phase
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
Gradual Brake
Gradual Brake
Motek's three phase brake motors Series ETEP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
The most significant dimension to define motor frame is the distance from the centre-line of the shaft to the bottom of the feet.
![]()
MOTOR DATA![]()
Select Motor Type
123456789
Select motor type
IEC Motors
Three phase motors for general use with standard output and standard dimensions. Sizes from IEC56 to IEC132
Three phase motors for general use with standard output and standard dimensions. Sizes from IEC56 to IEC132
Low Centre Motors
Motek ETE three phase square type series for high power output and reduced shaft height.
SEIMEC's three phase square type motors series HPE are particularly suitable for use on cutting, drilling and milling machines.
Compared to the IEC construction, the frame shape built in a light alloy expands the motor's work envelope and machining precision with work tool size being equal. Lower inertia - also vis-à-vis brushless motors - allows better starting performances.
The extended bearings and output shaft provide for rigidity and reliability.
Motek ETE three phase square type series for high power output and reduced shaft height.
SEIMEC's three phase square type motors series HPE are particularly suitable for use on cutting, drilling and milling machines.
Compared to the IEC construction, the frame shape built in a light alloy expands the motor's work envelope and machining precision with work tool size being equal. Lower inertia - also vis-à-vis brushless motors - allows better starting performances.
The extended bearings and output shaft provide for rigidity and reliability.
Select the Phases - Low centre
Three Phase
Three phase motors for general use with standard output and standard dimensions, 2, 4 and 6 poles. Efficiency class from IE1 to IE3.
Single Phase
Single phase motors series EM with resin-filled run capacitor fitted to the frame. Series EMD is equipped with a starting and a run capacitor fitted inside the terminal box. The auxiliary capacitor, managed with either a centrifugal or an electronic circuit breaker, is able to reach starting torques of up to 1.5 times the rated torque, ensuring interchangeability with the three-phase models.
Two-speed Three Phase
Two-speed three phase motors for general use with a single winding or two separate windings. Range for shaft height up to 132 with standard output and standard dimensions. Sizes from IEC56 to IEC132
Select the Phases - IEC
Three Phase
Three phase motors for general use with standard output and standard dimensions, 2, 4 and 6 poles. Efficiency class from IE1 to IE3.
Single Phase
Single phase motors series EM with resin-filled run capacitor fitted to the frame. Series EMD is equipped with a starting and a run capacitor fitted inside the terminal box. The auxiliary capacitor, managed with either a centrifugal or an electronic circuit breaker, is able to reach starting torques of up to 1.5 times the rated torque, ensuring interchangeability with the three-phase models.
Two-speed Three Phase
Two-speed three phase motors for general use with a single winding or two separate windings. Range for shaft height up to 132 with standard output and standard dimensions. Sizes from IEC56 to IEC132
ISTRUZIONI FASI
Efficiency class
IE1
Motor series ET, output is compliant with IE1 (Standard efficiency)
IE2
Motor series ETH, output is compliant with IE2 (Increased efficiency)
IE3
Motor series ETH, output is compliant with IE3 (Increased efficiency)
Efficiency class
EM
Single phase motors series EM with resin-filled run capacitor fitted to the frame.
EMD
Single phase motors with high starting torque Series EMD compact, with run and starting capacitors built ino the terminal box.
Efficiency class
EME
Motek single phase square type brake series with capacitors built into the terminal box
HPM
Seimec HPEM single phase square type range with capacitors built into the terminal box.
Efficiency class
ETE
Motek ETE three phase square type series for high power output and reduced shaft height.
HPE
Seimec three phase square type range with high power and reduced radial dimensions.
Select the Brake type
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
High-Torque Brake DC
Serie Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
A hand release lever is available on request.
High-Torque Three-Phase
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
Select the Brake type
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
High-Torque Brake DC
Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
A hand release lever is available on request.
High-Torque Three-Phase
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
Select the Brake type
FRENO FP
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
FRENO FC
Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
A hand release lever is available on request.
FRENO FA
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
Select the Brake type
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
Select the Brake type
Gradual Brake
Motek's three phase brake motors Series ETP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
High-Torque Brake DC
Motek's three phase brake motors Series ETC with high-torque positioning brake allow a precise stopping and holding of the position when no voltage is applied. They are designed for positioning applications and do not require any special maintenance, except for reinstating the air gap when needed. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the brake, feed the electromagnet coil via a rectifier.
High-Torque Three-Phase
Motek's three phase brake motors Series ETA with three phase positioning brake are designed for applications requiring a high intervention frequency. When no voltage is applied, the adjustable torque springs operating on the double friction surface disc help maintain the stopping position safely. To release the brake, feed the electromagnet coil with three-phase voltage. A hand release lever is available on request.
Select the Brake type
Gradual Brake
Select the Brake type
Gradual Brake
Motek's three phase brake motors Series ETEP with gradual brake are particularly suitable for applications that require gradual and silent load stopping without any particular need for precision. They are designed to both ensure user's safety and prevent damage to machine parts. The braking torque – non adjustable – corresponds to the pressure of springs which, when no voltage is applied, keep the brake disc in contact with the internal surface of the cast iron fan. To release the disc, feed the electromagnet via a rectifier. If necessary, the air gap adjustment screw can be reached without removing the fan cover.
Select the Poles
Synchronous speed depends on mains frequency f and poles p.
2
50Hz 3000 rpm
4
50Hz 1500 rpm
6
50Hz 900 rpm
8
50Hz 750 rpm
Select the Rating (kW)
Select the Size
The most significant dimension to define motor frame is the distance from the centre-line of the shaft to the bottom of the feet.
Select the Mounting Arrangement
Select the Mounting Arrangement
Select the Terminal box position
Select the Terminal box position
Select the Terminal box position
Forma costruttiva
ET56a-2-P IECIl motore elettrico trifase doppia velocità consente di adattare la potenza impiegata in base alle esigenze dell’applicazione garantendo un notevole risparmio energetico. Si può utilizzare in tutti i settori industriali, in particolare nel campo della ventilazione e aspirazione, si può accoppiare con riduttori di giri ed è adatto per essere comandato con inverter con possibilità di applicazione di kit servoventilazione con alimentazione separata. Tutti i nostri motori sono isolamento classe F, protezione in IP55 e seguono i più rigorosi parametri di rendimento internazionale. Garantiscono sicurezza e prestazioni ottimali nello svolgimento delle attività a cui vengono adibiti.
PERFORMANCE DATA
| Rating |
| provakW |
| provakW |
| provakW |
| provakW |
| Servizio |
| S6 |
| Speed |
| rpm |
| rpm |
| rpm |
| rpm |
| Frequency |
| Hz |
| Hz |
| Voltage |
| V Δ |
| V Y |
| V Δ |
| V Y |
| Full Load Torque (Mn) |
| Nm |
| Nm |
| Nm |
| Full Load Current (In) |
| A Y |
| A Y |
| A Y |
| A Δ |
| A Δ |
| A Δ |
| Starting Current (Is) |
| Is/In |
| Is/In |
| Starting Torque (Ms) |
| Ms/Mn |
| Ms/Mn |
| Pull Out Torque (Mm) |
| Mm/mn |
| Tipology |
| range |
| phase |
| brake |
| subset |
| nr_poli |
| size |
| Efficiency |
| % |
| Power Factor |
| cos φ |
| cos φ |
| Run Capacitor |
| µF |
| Start capacitor |
| µF |
DIMENSIONS
| Iec Size |
| type |
| Mounting Arrangement |
| Weight |
| Kg |
| Inertia |
| Kgm^2 |
| Protection degree |
| Balancing |
| Direction of rotation |
| Cooling |
| Bearings |
| De |
| Nde |
BRAKE
| Tipo |
| Coppia |
| Nm |
| Potenza |
| W |
PRODUCTION STANDARD
| Frame |
| Multi-mount |
| Terminal box |
| Fan cover |
| Painting |
| Cable Glands |
APPROVALS
| CE UL CSA ATEX |
ENVIRONMENT
| -20°+40°C 1000mt/l.m. |
| Temperatura ambiente |
| Altitudine sul livello del mare |
| Classe di isolamento |
Vuoi saperne di più sui motori elettrici MOTEK?Contatta subito uno dei nostri Consulenti Certificati
MOTEK.CONFIGUtilizza il nostro configuratore di ultima generazione per verificare quale motore è
